Self-diagnose your IQOS ILUMA i PRIME

Number “0” flashing on the Touch Screen

Is number “0” flashing on the Touch screen of your IQOS ILUMA i PRIME holder 3 times? Then your holder is discharged, and here is how to charge your holder:
1. Place the holder back inside the IQOS ILUMA i PRIME Pocket Charger. Ensure it is placed correctly and close the Pocket Charger door.
2. Make sure your pocket charger is charged enough to fully charge the holder.
3. Leave the Holder to charge, until at least one Holder’s status light turns solid white on the Pocket Charger.

Lights on holder not turning ON

After swiping up, are your holder lights not turning ON? Here’s what to do to resolve the no lights issue on the holder:
1. Check whether the Pocket Charger is charged for at least one experience. To identify this, at least one solid white light will turn on.
2. Clean the contacts between the holder and the Pocket Charger.
3. Place the holder inside the pocket charger- ensure it is placed correctly- and leave the holder until at least one of the holder lights on Pocket Charger turns solid white.
4. Remove the holder from the Pocket Charger and swipe up the holder’s touch screen

Pause mode is unavailable

As a first step, ensure that Pause feature is activated on your device:
• Pause mode is illustrated by 2 short vertical lines at the top of the Touch Screen.
If no vertical lines are displayed, meaning your device does not have pause feature activated, you may visit our Branded store to activate the feature.
If Pause mode is available:
• Pause Mode can be used once in the first or second consecutive use (if your device is in Performance Mode) and can be activated within the first 3 minutes, or 8 puffs of the experience.
1. Swipe down across the entire Touch Screen to activate the Pause mode.
• If the swiping motion does not cover the entire length of the Touch Screen, pause mode will not be activated.
2. Resume the experience, swipe UP across the entire Touch Screen and wait for the preheating.
• Pause Mode can last up to 8 minutes. If experience is not resumed, the Holder will automatically switch off.

FlexPuff not working


Your device will automatically analyze the consumed volume of aerosol and might activate FlexPuff.
Thus, the extended experience might not apply to all adult consumers and/or experiences.
When Pause is used FlexPuff cannot be activated.
If Flexpuff will be activated, then you will be granted with 4 extra puffs, that can be used still within up to 6min experience duration.
You can activate/deactivate this feature by approaching our official IQOS stores.

FlexPuff activation and number of puffs depend on individual usage patterns.

Got a question? Find the answers in our FAQs.

Something we haven’t covered?
There are several ways you can reach us:
Find your nearest IQOS store
Store locator
You can also send a message on Facebook.
IQOS Support Georgia
Available regardless of your location* and working hours *available if territory supports viber
Find out more
Your question might have already been asked before. Browse our FAQs to see if there’s an answer waiting for you.
FAQ
We're here for you in-store or at your fingertips. You choose.
If you want to speak with an IQOS expert, call us at 0 800 003 003. Our call center is open every day from 10 am to 8 pm.
0 800 003 003
Our inbox is never too full
Write to us
IQOS ILUMA™ is designed to be used only with SMARTCORE STICKS™. Do not use SMARTCORE STICKS™ with previous IQOS™ generations, as this may cause damage to your device. Do not ingest or disassemble SMARTCORE STICKS™. This product contains a sharp metal part which can cause serious injury if swallowed. Keep out of reach of children.